Solderless Silver Conductive Wire Adhesive Paste - PCB Electronics Repair
Product Code:
EN-06BB
Brand:
ENSON
Product Condition:
New
£4.99 inc. tax
Description
Solderless Silver Conductive Wire Adhesive Paste For PCB Electronics Repair
Brand New 0.2ML of silver paste in a syringe.
Soldering Iron in a Syringe!
The solution when you can't find the soldering iron, don't want to bother, are out in the woods!
This silver paste conducts low voltage AC and DC circuits in a permanent bond and is easy to use.
It's easy to use! no heat or solder gun required.
Great for for joining wires.
Great for for joining wires.
Repairing defect traces/tracks or creating smooth jumpers on PCB board.
It can be used for repairing membrane switches.
Perfect for both rigid & flexible substrates.
It's widely used in electrical items PCB circuit boards, CPU in computers, LED display, LCD display, controller, heat sink and LED etc. etc.
Silver Conductive 0.2ML Wire Electrically Paste Adhesive Paint PCB RepairSpecifications:
Solid powder 60-80% 1) Has excellent electromagnetic shielding effectiveness.
2) Can be used for ABS, PC, ABS / PC plastic with excellent adhesion to the substrate.
3) 100% pure silver powder medium, with excellent conductive properties.
4) Excellent wear resistance.
5) Excellent moisture resistance.
6) Excellent drying. Approx 20 mins.
(If you want to dry rapidly, blow with a hair dryer for 5 - 10 minutes)
Technical Data:
Weighting 25Degree 1.46-1.48g/cm3
Resistance <0.02 ohm="" sq="" film="" thickness="" of="" 12="" microns="" span="">
Viscosity> 20000CPS
Shielding effectiveness> 80dB
Recommended dry film thickness of 12-16 microns
Recommended Thinner Thinner ethanol
Dilution ratio conductive paint: thinner = 1:0.7-0.8 (weight ratio)
Humidity environmental test 85 Degree / 85% RH constant resistance value after 7 days
Dry conditions 60 Degree 20 min (you can use a hair dryer or heat gun heat cure faster)
2) Can be used for ABS, PC, ABS / PC plastic with excellent adhesion to the substrate.
3) 100% pure silver powder medium, with excellent conductive properties.
4) Excellent wear resistance.
5) Excellent moisture resistance.
6) Excellent drying. Approx 20 mins.
(If you want to dry rapidly, blow with a hair dryer for 5 - 10 minutes)
Technical Data:
Weighting 25Degree 1.46-1.48g/cm3
Resistance <0.02 ohm="" sq="" film="" thickness="" of="" 12="" microns="" span="">
Viscosity> 20000CPS
Shielding effectiveness> 80dB
Recommended dry film thickness of 12-16 microns
Recommended Thinner Thinner ethanol
Dilution ratio conductive paint: thinner = 1:0.7-0.8 (weight ratio)
Humidity environmental test 85 Degree / 85% RH constant resistance value after 7 days
Dry conditions 60 Degree 20 min (you can use a hair dryer or heat gun heat cure faster)
Updating Order Details
Please do not refresh or navigate away from the page!
Reviews
No Reviews Posted Yet - be the first!
write review
